How to connect ij start canon mx922 in 2021?

ij start canon mx922 is one of the top printer models that deliver a sophisticated printing experience. ij canon mx922 is the best option to go for if you expect quality printing. It suits for both individual and official printing purposes.

ij start canon mx922 printer setup

ij-start-canon-mx922-scan
  • Unbox the ij canon mx922 printer and take out the printer accessories from the shipment box carefully. 
  • Plugin the printer to the power source using a power cord and Turn on the canon mx922 printer.
  • Select the preferred language and follow the on-screen instructions.
  • Insert only the ij start canon mx922 printer setup ink cartridges for initial step, also have your replacement cartridges ready as the setup cartridges won’t last long.
  • Insert all the four cartridges in the respective spots. Ensure to remove the protective covers of the cartridges.
  • Start canon mx922 printer will take exactly 3 minutes to read the cartridges.
  • Pull out and Load the input tray with enough white sheets and adjust the paper glides.
  • Again printer will take about 6 minutes to read the paper and print the alignment page.
  • Wait for the ij canon’s mx922 printer alignment page and check if the alignment is good.
  • For any assistance reach our support team for instant help.

Driver installation for ij start canon mx922

The driver software enables the system to get connected with the canon mx922 printer, follow the steps below to install the apt driver for your printer.

  • Download the driver from the website http ij start canon given on our webpage.
  • Open the software from the downloads folder and start the installation procedure.
  • Select the location, then click “Next” and follow the on-screen instructions.
  • Click “Agree” to the license agreement and select the preferred mode of connection.
  • Connect the USB cable from the canon pixma mx922 printer to the computer before selecting a wired connection.
  • Have your wireless name and password ready for the wireless setup.
  • Click “Next” and perform test prints to check the print quality.

Scanner software for canon pixma mx922 printer

ij-start-canon-mx922-2021
  • Canon pixma mx922 allows the user to scan multiple pages effortlessly.
  • Users can simply align and place the documents on the automatic feeder to scan multiple pages.
  • Canon printer mx922 requires scanner software to enable scanning to the computer.
  • Visit the website http ij start canon and download the scanner driver on to the computer.
  • Find the scanner utility software from the downloads and install it on the computer.
  • Open the installed scanner software and set up the scanning function.

How to scan from ij canon pixma mx922?

  • Follow the above-given scanner software installation procedure to install the scanner utility program for pixma mx922.
  • Place the document on the glass or feeder that needs to be scanned.
  • Choose the file format and source from the scanner software for your canon mx922.
  • Click on “Scan” at the bottom and choose the destination folder to place the scanned copy.
  • Reach our support team for any scanner related assistance.

Complete guidance to setup canon mx922 wirelessly

  • Power on the router and press the “Menu” button on the pixma mx922 printer.
  • Use the arrow buttons to toggle between options and use the “Ok” button to select.
  • Select the standard setup option and press “Ok” on the canon mx922 printer.
  • Select the router name and enter the password so that the printer gets connected to the wireless network.
  • The wireless password will be case sensitive, so make sure to enter the password correctly.
  • Click “Next” and the canon printer will take 30 seconds to get connected to your network.
  • Note that the printer cannot be connected to the public network, you must have one router to connect the pixma mx922 printer wirelessly.

How to setup ij canon pixma mx922 printer on a Windows computer wirelessly?

  • Turn on the pixma mx922 printer , confirm the router setup and network connection. 
  • The blue light near the copy button makes sure that the mx922 printer is turned on. 
  • Turn on the “WPS” button on the router for wireless network connection and press the “Menu” button on the ij start canon mx922 printer to select the “WLAN” setup option.
  • Click “Ok” when the canon printer screen displays “WPS access point is detected” and now the printer gets connected to the router.
  • Return to the main screen by clicking the “Copy “ button.
  • You can also follow the above wireless connection topic to connect the canon pixma mx922 printer to the network.
  • After a successful wireless connection proceed with the software installation.
  • Download the driver software from the http ij start canon link given.
  • Click “Agree” to the license agreement and then the driver gets installed on your windows computer. 
  • Now go to the control panel and add the canon mx922 printer name to do the test print.

ij start canon mx922 wireless setup for Mac computer

  • Turn the canon mx922 printer on and ensure an active wireless network.
  • When the mx922 printer is turned on blue light near the copy button lights up. 
  • Press the “Menu” button and using the four arrow keys select “WLAN” setup, choose the other setup options.
  • Select “Standard setup” and wait for the canon printer to show up in your network.
  • Select your network and enter the password to connect.
  • The printer now gets connected to the Wi-Fi network and now return to the main screen by pressing the “Copy” button.
  • Download the installation software on the Mac computer from the https ij start canon website.
  • Double click the driver package file to run the mx922 setup and click “Continue” on the Introduction page to agree with the license agreement. 
  • Enter the Mac username and password to install the software from the installation type screen.
  • Follow the on-screen instructions to complete the ij start canon installation.
  • Once the software gets installed add the printer to the Mac computer and run the test print. 

How to connect canon pixma mx922 printer using a USB cable

  • Hook up the power cable and turn on the pixma mx922 printer.
  • Connect the canon printer and computer using the USB cable.
  • On your computer download the driver software for the canon pixma mx922 printer and install all the utility programs ,select the region and press “Next” to start up the driver installation.
  • Select the connection mode as “USB” and do agree with the license agreement. 
  • Follow the on-screen instructions to complete the wired connection and do reach out to us for further assistance.

Canon pixma mx922 wireless setup for android device

  • Make sure that the canon mx922 printer and the phone is connected to the network.
  • Download the canon printer app on the mobile phone from the play store. 
  • Open the app and click on search for the available printers.
  • The application will show up on your printer. Select canon pixma mx922.
  • Allow the permissions for the ij start canon mx922 printer and phone to exchange data.
  • Now the mobile printing from your canon pixma mx922 printer is enabled successfully.